Most Recently Added Products
 |
Manufacturer |
Part Number |
Product Name |
Date Added |
|
|
HAI |
20A00-53X |
Automation Controller, Omni IIe board only |
1/3/2012 2:32:21 AM |
|
|
HAI |
53A05-GA |
Omnitouch Finishe Metal color change kit for 5.7 & 5.7e models, GOLD ALUMINUM, Finished metal faceplates available in Black Aluminum, Bronze, Gold, and standard Aluminum (Silver), Each |
1/2/2012 4:03:58 PM |
|
|
HAI |
91A00-2 |
The 91A00-2, 8-Port PoE Switch for structured wiring enclosures, is used to provide power to and networdk up to seven 5.7e touchscreens or any Ethernet device that support POE power inputs |
1/2/2012 3:33:41 PM |
|
|
HAI |
71A00-1 |
HLC Load Control Module, UPB, Control the power consumption of high wattage loads such as pool pumps and water heaters, 30 Amp. |
1/2/2012 3:10:14 PM |
|
|
HAI |
19A00-1 |
Relay Modules are used to convert HAI voltage outputs to Form C relay contacts for switching pumps, motors, commercial lighting, remote control breakers, and sprinkler systems. This Relay Module provides 8 independent Form C Relays |
1/2/2012 2:58:03 AM |
|
|
HAI |
90A00-1 |
One Port, POE Injector, used to power the 5.7e touchscreen, part number 53A00-2 (sold separately) |
1/2/2012 2:36:48 AM |
|
|
HAI |
70A00-1 |
Two-Way Cellular Communication Center emulates phone line signal to dial out using your cellular network. Requires GSM SIM card and cellular service. Can be used if land line is not present. |
1/2/2012 1:46:15 AM |
|
|
HAI |
91A00-1 |
The 91A00-2, 8-Port PoE Switch is used to provide power to and networdk up to seven 5.7e touchscreens or any Ethernet device that support POE power inputs |
1/2/2012 1:33:28 AM |
|
|
HAI |
39A00-3 |
Three-Phase Repeater (TPR) enables communication between UPB devices on a three-phase 120/208VAC delta-wye, 60Hz electrical system. The main purpose of the TPR is to transfer UPBT multi-packet messages transmitted on one phase |
1/2/2012 1:27:15 AM |
|
|
HAI |
39A00-2 |
UPB Split Phase Repeater |
1/2/2012 1:11:14 AM |
|
|
HAI |
9137111CE |
2N Helios VoIP video intercom door station for single-family residential installation. Press the button and it calls IP Touchscreens in the home allowing homeowners to both speak with and see the guest. Connects to the home's Ethernet network |
1/2/2012 12:44:13 AM |
|
|
HAI |
87A04-1 |
Universal Mounting Plate Kit with hardware is used to mount Camera Server 87A00-1 [sold separately] in Leviton or "open house" type structured wiring enclosures. |
1/2/2012 12:28:58 AM |
|
|
HAI |
68A11-1 |
1.3 Mega Pixel Indoor/Outdoor Mini Dome IP Camera capable of serving real-time streaming video to various devices, it can be viewed on an iPhone without any additional software. |
1/2/2012 12:08:24 AM |
|
|
HAI |
87A00-1 |
Camera Server, 4 Camera, Can be viewed with Snaplink or WL3 software, use with HAI camera or any analog camera or video source |
1/1/2012 11:55:33 PM |
|
|
HAI |
69A00-1 |
4-Button Wireless Keypad can be programmed to control any Omni or Lumina controller and requires the use of HAI's 64 Zone Wireless Receiver, part number 45A00-1. |
1/1/2012 11:29:29 PM |
|
|
HAI |
63A00-1 |
Wireless Driveway Sensor, Requires 45a00-1 wireless receiver, Operating range -20 and 120F, can detect a vehicle in the driveway or parking area to activate lighting, video surveillance, and more |
1/1/2012 11:18:50 PM |
|
|
HAI |
53A05-SA |
Omnitouch Finishe Metal color change kit for 5.7 & 5.7e models, STANDARD ALUMINUM, Finished metal faceplates available in Black Aluminum, Bronze, Gold, and standard Aluminum (Silver) |
1/1/2012 10:27:47 PM |
|
|
HAI |
53A05-BRA |
Omnitouch Finishe Metal color change kit for 5.7 & 5.7e models, BRONZE ALUMINUM, Finished metal faceplates available in Black Aluminum, Bronze, Gold, and standard Aluminum (Silver) |
1/1/2012 10:27:33 PM |
|
|
HAI |
53A05-BA |
Omnitouch Finishe Metal color change kit for 5.7 & 5.7e models, BLACK ALUMINUM, Finished metal faceplates available in Black Aluminum, Bronze, Gold, and standard Aluminum (Silver) |
1/1/2012 10:27:07 PM |
|
|
HAI |
95A12-2 |
Hi-Fi 2, 8 Zone-Expansion Amplifier Kit on Universal Mounting Plate. Includes expansion Amplifier Assembly [95A18-1], 8 VSC's [95A03-1], power cord, [95A17-1] expansion cable [95A16-1], 2 variable outputs. Mount within 6 inches below Main Amplifier. |
12/27/2011 1:03:11 AM |
|
|
HAI |
95A01-1 |
Hi-Fi 2 Main Amplifier Assembly with power supply and power cord (95a00 series, replacement.) |
12/27/2011 12:11:26 AM |
|
| |
