Right Click on Link and Select "Save Target As" to Download the Technical Sheet
INSTALLATIONThe Quad Auxiliary Switch can be mounted in any single gang wall box or low voltage bracket. Two Cat5 cables should be installed between the location of the ALC Hub and the location of each Quad Auxiliary Switch (see Figure 3).Installation ProcedureStep 1: Punch down the Cat5 cable conductors to 110 IDC connectors on the back of the Quad Aux Switch. Figure 3 shows a typical wiring scenario.Step 2: Label the Quad Auxiliary Switch buttons. Remove the clear lenses by inserting a small tool, such as a paper clip, into the holes in the circuit board on the back of the switch. Refer to Figure 2. After the lenses have been removed, apply any of the provided descriptive labels. Replace the lenses.Step 3: Place the switch and wires in the wall box.